What are the characteristics of flux
Welding materials usually contain flux. Flux is usually a mixture of rosin as the main component, which is the auxiliary material to ensure the smooth welding process. The main function of flux is to remove the oxide on the surface of solder and base metal (material) to make the metal surface reach the necessary cleanliness. It can prevent the re oxidation of the surface during welding, reduce the surface tension of solder and improve the welding performance. The performance of flux directly affects the quality of electronic products.
The flux has the following characteristics:
1) wetting (lateral flow): also known as wetting, refers to the formation of a uniform, smooth, continuous and firmly adhered solder layer on the metal surface. The degree of wetting mainly depends on the cleanliness of the surface of the weldment and the surface tension of the solder.
2) diffusion (longitudinal flow): along with the wetting phenomenon of molten solder diffusion on the welded surface, the solder also diffuses into the solid metal.
This article comes from the manual welding equipment of water tankhttp://www.santacatalinainn.com
-
12-20
Methods to reduce welding deformation and control
I. causes and types of welding deformation causes of welding deformation: welding deformation refers to the deformation of weldments during and after welding. During welding, the molten metal and the base metal near the seam expand and produce plastic deformation. During solidification, the weld and the metal near the seam contract. This is the longitudinal stress and the transverse stress. Make the weld longitudinal and transverse shrinkage, so that the weldment deformation. Because the heat e
-
12-20
Specific differences between grinding machine and polishing machine
Difference: the workpiece processed by grinding machine is rough, and the surface finish of workpiece processed by polishing machine is better, but high finish can be achieved by installing precise grinding wheel on grinding machine. Grinding machine: electric grinder reciprocating electric polishing grinder (also known as file mill). It is widely used in the fine machining and surface polishing of the mold profession. It is a substitute for similar pneumatic products. The main outstanding featu
-
12-20
How to improve the efficiency of straight seam welding machine?
The straight seam welding machine is widely used in ordinary times, and our appeal to the seam welding machine is constantly strengthened. We should know about the operation of the seam welding machine. The straight seam welding machine is not only excellent in spot welding machine, but also excellent in seam welding machine. A good machine must be equipped with a good operator. It is not simple to be a good operator. In addition to the accumulation of time experience, it also needs many tips, s
-
12-20
How to deal with the failure of welding robot?
General welding robot factory has the following shortcomings: a) human shortcomings caused by improper operation, mainly including welding gun damage in welding robot factory, improper loading and unloading of workpieces, and no deformation of positioner follow-up. B) the disadvantages of poor design and manufacture of peripheral equipment mainly include: problems of lifting way switch and cable, quality problems of some components flashed by teaching device. C) improper environmental protection